Search results

I am replacing an oil seal on my AC Fuel Pump, as we found it was leaking slightly during annual inspection. When removing the cover, two springs and caps dropped out and I wanted to make sure they are installed correctly after replacing the seal. Does anyone have an exploded diagram of the...

Recently, I took apart my tail wheel. I found the following parts. Does anyone have a drawing, pics, or parts list for the 14-13 tail wheel? Pat

I have a 14-13 and would like to install right seat brakes. The left seat has scott 4000 master cylinders with cleveland brakes (stc) on the wheels. Overall, left seat braking is okay, but not spectacular due to the high volume, low pressure scott 4000's. if i can find the right seat pedals and...

Does anyone have the blueprint for the Landing Gear Brass Trunion on the 14-13? I want to get some new ones made. Pat

During my annual inspection on my bellanca 14-13 I found a slight crack on the tube that contains the brass trunion. I recently got the crack welded by a certified aircraft welder and have installed it back on the aircraft. The gear structure design and most notably the 4130 tube that contains...

Does anyone have the correct rudder stop angle limits for the Bellanca 14-13.. Mine is cracked and needs to be welded.. Pat

My Bellanca 14-13 (165hp Franklin) has a unique air filter system. Air enters the system via the normal round airscoop on the cowl. The scat tube then runs under the exhaust system, along the right side of the lower cowl to an airbox on the right side of the firewall. Air enters the lower...

During my annual inspection on my 14-13 (165hp Franklin) I noticed my Oil Cooler was leaking oil. Does anyone out there have a servicable oil cooler I can purchase or can anyone recommend a replacement oil cooler. Thanks Pat

The time has come to have my Annual Inspection completed in August. I am looking for anyone familiar with the Bellanca 14-13 in the Dayton, Ohio area. If you have someone in mind, please feel free to let me know. Patrick