Search results

Does anyone have a shoulder harness system with inertial reels? If not, do you find that you are restricted in your movement if the shoulder harness is only adjustable on the straps themselves. Thanks Greg

The flexible "boot" that connects the air filter to the airbox has a tear that is starting to develop. Cannot find any info on this part. I have looked through numerous sources. Certainly possible that I have overlooked something. Anyone with info. 7-KCAB. Thanks GREG

I have a 7kcab that the oil temp is barely manageable when it is mid 90's outside. Has anyone experienced this problem and any solutions. Baffling appears to be in order. Oil cooler fins are all clean. Checking the temp probe and flushing the oil cooler are the next steps I have considered...

Does anyone have a fixed rudder trim tab on their Citabria? If so, any information on it's installation and paperwork trail. Thanks Greg B

I recently pulled the seats out of my Citabria, unfortunately I did not note the position of the seat frame relative to the attach points on the frame of the A/C. Does the seat frame go outside or inside of the attach points. YES, I know I should have paid more attention. GREG

I have a late 1960's citabria. The sealed battery sits on top of a tray assembly, which is mounted to the airplane frame, sitting directly behind the aft baggage area. I have several questions. #1 With a similar battery location, do most planes utilize a battery box which is drained? #2...

My mech has run across a STC (SE7CE) which apparently must be complied with for a 7KCAB to have an IO 320 E2A engine installed. The airplane was originally manufactured with this engine installed. We are still trying to track down info on paperwork and what actually needs or not needs to be...

I have a 7KCAB that has a yearly AD that applies to the mufflers. I believe the AD specifies that the mufflers are to be removed and the inside baffles are to be examined. I am not trying to short cut the AD, but I am curious if during preflights or when the cowling is removed for oil changes...

My Upper Wing Gap Covers (trim pieces that seal the top of the wings to the fuselage) on both wings have black guey sealer that has oozed out from both sides of the trim piece. I bought the plane this way. Curious how others have tried to seal these gap covers, or if most owners don't find it...

I have seen references to parts purchased through ACA. I have also seen comments about ACA doing mx work such as gear. When I go to the ACA website I do not find these services mentioned. Could someone let me know what all is available from these guys in terms of support? If I have...

I have what are probably factory original wheel pants, minus the mounting bracket and hardware, for a 67 7KCAB. I am not having any luck finding the bracket and attachment hardware. Does anyone have any ideas where to find these. Thanks Greg

I have a 1967 Citabria with a Scott 3200 tail wheel. I am curious about finding a tow bar. I have seen some info posted several years ago, but I wonder if anyone has some more current info. Any tow bars that are good or not good? Where did you find the good tow bars?