14-13 Rudder stop crack

[pdriscoll]

Does anyone have the correct rudder stop angle limits for the Bellanca 14-13.. Mine is cracked and needs to be welded.. Pat

 

[Larry Lowenkron]

check the type certificate. I think it is 18 deg. L & R.

 

[kitepilot]

Where can I find the TC for the 14-13?
I was told that the drawings are at the Smithsonian, can they be copied?

 

[lwford]

I just checked T-Data and Larry is right it is 18 degrees right and left. Lynn the crate

 

[Larry Lowenkron]

Go to:

http://www.faa.gov/mechanics/

look for the link on that page.

Larry

 

[pdriscoll]

Once again.. Thanks Larry.. Pat

 

[blimpy]

The Bellanca Operating manual for the 14-13 series lists the rudder ( and aileron) angles for the 14-13 and later -2 and -3 models. You can get ( and should own) this which is available as a reprint from the club.. if you dont have an original.

Different for the later models than for the original 14-13 btw.

( can 't quote mines in my plane )

Capt Larry aka blimpy