Cruisair Gear Bushings

N

nvracer

New member
I am going to rebuild the main gear on my 14-13-2. I have new springs, but don't know where to get the lower bushings for the upper gear leg. Also, do the upper bushings usually need replacement. Do any of yopu know where I can find the bushings?

Thanks,

Ray
 
Any good machine shop should have bushing stock. They will need the bolts so they can size them together. They are pressed in and then honed to fit. The hard part are the top ones. I had my wings off the plane so I removed the top bracket and did them :lol: :lol:
 
Thanks Randy,

From your reply I would say that you are talking about the scissors bushings and the ones at the top of the gear leg at the pivot point.

Maybe I should have been more clear. I am wanting to replace the large threaded bushings that screw into the bottom end of the upper gear leg & the one that is inside near the top of the upper gear leg.

Ray
 
You must log in or register to reply here.
Back
Top