Gary Brink
New member
Can anyone tell me where to find a door seal for my Cruisair? I'm talking about the seal that goes around the door.
Gary
Gary
Door seal for 1413-2
- Thread starter Gary Brink
- Start date
Bernie Ferrie
New member
Hi Gary,
I used a rectangle rubber seal, which is approx 3/4 inch by 1/2 inch I bought it at the local rubber store. It is pretty flexible and if you pull it tight it reduced it's thickness - which is handy as the seal depth in the door varies. It is pretty hard to get a good seal, and the door to close nicely. It took me a few goes to get it right. I just stuck it in with contact adhesive, that worked well. If you can't get it I can send some over.
Hope the Cruisair project is going well, mine is a little slow
regards
Bernie
I used a rectangle rubber seal, which is approx 3/4 inch by 1/2 inch I bought it at the local rubber store. It is pretty flexible and if you pull it tight it reduced it's thickness - which is handy as the seal depth in the door varies. It is pretty hard to get a good seal, and the door to close nicely. It took me a few goes to get it right. I just stuck it in with contact adhesive, that worked well. If you can't get it I can send some over.
Hope the Cruisair project is going well, mine is a little slow
regards
Bernie
Gary Brink
New member
Thanks, Bernie. I'll look around to see if I can find the strip you described. Although my door is old, it has about two feet of new looking door seal. It has adhesive on the flat side and is hollow. I'm guessing that it is available somewhere and it really fits nicely into the door.
Gary
Gary