Seat belt attach points

D

Dover

Member
Ok sad to say I even have to ask! I just picked up a project 14-19 s/n 2032. I can find for the life of me where the front seatbelt attach points are or should be.

Thanks
Dover
 
I wonder if the attachment points are the same as a 14-13? 392's attach points are the diagonal tubes in the bottom seat frame on the top carry-through spar.
Don't really LIKE that setup, but it seems to hold well enough.
I welded in two triangular plates up in the top corner of the frame for some shoulder harnesses, but can't decide whether to put them in or not :?
 
Don't weld on that chrome moly tubing unless you REALLY know what you're doing and then with either gas, TIG, or at least MIG (not a cheap wire feed welder).

All you REALLY need to do is wrap the seat belt end around the rear horizontal seat tube and then feed the end back through the metal "H" buckle just like you would to that bracket that you are thinking about welding on!! That's the way the factory did it!! ;-}

Tim
 
You must log in or register to reply here.
Back
Top