Wiring KX17B and Narco XPDR

NC74392

NC74392

New member
Well I goofed. When I removed the chassis from the old panel I didn't label the wires coming out of the radios. I have two wires spliced together onto one ring lug for the KX170B NAV/COM and one wire by itself.
The NARCO transponder has two individual wires with ring lugs.
Now- am I right in supposing the KX170B has two power leads for the Nav and Com seperately and one lead for the internal light?
The NARCO- does it have one power lead and one for the light too?
5 leads total.

Need to know this one :!:
 
Double D, send me your address and I will Mail you the wiring install schematics for your radios. Lynn N9818B the crate :roll: :mrgreen:
 
Double D. didn't say what kind of Narco XPR but I will send you all that apply. Most of the wires are gray code for the encoder. You have just the KX 170 and XPR no audio panel or inter comm. I send this weekend all Narco At 50/50A and 150 and KX 170/175 install schematics. LYNN N9818B the crate :mrgreen:
 
Things are really coming together now. WHo knows? Maybe I can make OSH this year :?:
Oh man, I hope I didn't jinx it... :shock:

Lynn- you're the greatest :!:
 
OK Double D! Look for the crate N9818B at Oshkosh. I hope Glenn Hake gets the Bellanca's into Oshkosh together for openning day. It would be super if we could all flyin ,park and camp in the same row just like the other types. That way you won't have to search the whole event looking for low wing Bellancas. LYNN :p :p :D
 
You must log in or register to reply here.
Back
Top